Sharp SA-606H Radio Tuner Stage

Tuner side of the amp.
return

The Sharp SA-606H has a heterodyne tuner with the Toshiba TA7054P front end, which helps reduce the component count. The radio tuner sounds nice, and the channel separation for FM stereo is impressive. It seems to have a greater separation than my DAB radio. Living close to the Crystal Palace transmitter, I used a very short 1-metre length of wire for the aerial and the reception was good. If you need to repair the tuning string of your vintage radio then the images here show how the string goes. This was a typical configuration used on most of the vintage radios and chances are that it will be the same on yours.

Radio Tuning Cord
Tuner Module
Variable Capacitor
Ferrite Rod and Coil
Tuner Module
Ferrite Coil

This Article Continues...

Sharp SA-606H Vintage Amplifier
Sharp SA-606H inside View
Sharp SA-606H Radio Tuner Stage
Sharp SA-606H Transformer and PSU
Sharp SA-606H PCB and Back Chassis
Sharp SA-606H Back Sockets
Sharp SA-606H Amplifier Stage