Roboraptor Disassembling Neck

The Roboraptor neck assembly is extremely complicated as it consists of plastic linkages, bundles of wires, loudspeaker, and spring. In addition, there is also a transmission line similar to a bicycle break cable, which passes through the neck cavity. Do not disassemble this part because it will be extremely complicated to install it again. In my case, one of the plastic linkages was broken and therefore I was curious to gain access to the cracked part so I could repair it again.

This is the linkage plate that the transparent rods connect with.

As you can see, transparent plastic linkage rods connect to the neck linkage plate. A sock-like cover is used to prevent anything getting tangled with the linkages. It is possible for these linkages to break if the neck is twisted by force, therefore be very careful.

This Article Continues...